Explore our equipment for sale and rental.
选择设备，
再选择销售或租赁。
Tell us your preferred brand, series, model or capacity; we’ll source a matching unit for purchase or rental.
告诉我们所需品牌，系列，型号或吨位， 我们会为您寻找匹配现货，并按项目需求安排销售或租赁。
The sections below list common models and performance data by equipment category;
actual specifications vary by year, configuration and application.
下⽅按设备类别列出常⻅型号与性能资料；实际参数依年份、配置及作业条件⽽异。
FORKLIFT
叉车
Toyota is a core brand. 8FBE battery-electric and 8FD diesel forklifts are available for sale or rental; Noblelift forklifts are also offered for sale.
Toyota 为主⼒品牌。8FBE Battery 电动与 8FD Diesel 柴油叉⻋均可销售或出租；Noblelift 叉⻋亦提供销售。
✔ 购买销售 / For sale
✔ 设备租赁 / For rent
送达⻢来西亚半岛各地项⽬现场 / Delivery to project sites across
Peninsular Malaysia
选型要点 / SELECTION GUIDE
Selection: power type · rated capacity/tonnage · mast height · battery/tyres · attachments
选型要点：驱动类型 · 额定载荷/吨位 · ⻔架⾼度 · 电池/轮胎 · 属具
BACKHOE
反铲装载机
The catalogue includes JCB 3CX/4CX, Cat 420/430, plus historical CASE 580SK, 580L Series 2 and 580M references.
⽬录涵盖 JCB 3CX/4CX、Cat 420/430，以及 CASE 580SK、580L Series 2 与 580M 等历史型号参考。
✔ 购买销售 / For sale
✔ 设备租赁 / For rent
送达⻢来西亚半岛各地项⽬现场 / Delivery to project sites across Peninsular Malaysia
选型要点 / SELECTION GUIDE
Selection: model · digging depth · bucket capacity · operating weight · drive
选型要点：型号 · 挖掘深度 · 挖⽃容量 · ⼯作重量 · 驱动⽅式
SHOVEL
铲装设备
The catalogue features Cat 950 GC, 966 GC and 980 GC ranges for selection by bucket capacity, operating weight and material.
⽬录展⽰ Cat 950 GC、966 GC 与 980 GC 系列，可按⽃容、⼯作重量及物料⼯况选型。
✔ 购买销售 / For sale
✔ 设备租赁 / For rent
送达⻢来西亚半岛各地项⽬现场 / Delivery to project sites across Peninsular Malaysia
选型要点 / SELECTION GUIDE
Selection: machine type · tonnage/operating weight · bucket capacity · worksite
选型要点：设备类型 · 吨位/⼯作重量 · 铲⽃容量 · 作业环境
SCISSOR LIFT
剪叉式升降平台
JLG ES1932 and ES2646 electric scissor lifts can be selected by working height, platform capacity and site conditions.
JLG ES1932 与 ES2646 电动剪叉平台，可按作业⾼度、平台载荷与场地条件选型。
✔ 购买销售 / For sale
✔ 设备租赁 / For rent
送达⻢来西亚半岛各地项⽬现场 / Delivery to project sites across Peninsular Malaysia
选型要点 / SELECTION GUIDE
Selection: working height · platform capacity · deck extension · power · indoor/outdoor
选型要点：⼯作⾼度 · 平台载荷 · 平台延伸 · 电源 · 室内/室外
BOOM LIFT
臂式升降平台
JLG 450AJ and 600AJ articulating boom lifts can be selected by working height, outreach, up-and-over access and ground conditions.
JLG 450AJ 与 600AJ 曲臂平台可按⼯作⾼度、⽔平延伸、越障与地⾯条件选型。
✔ 购买销售 / For sale
✔ 设备租赁 / For rent
送达⻢来西亚半岛各地项⽬现场 / Delivery to project sites across Peninsular Malaysia
选型要点 / SELECTION GUIDE
Selection: working height · horizontal outreach · telescopic/articulating · drive · ground conditions
选型要点：⼯作⾼度 · ⽔平延伸 · 直臂/曲臂 · 驱动 · 地⾯条件
FORKLIFT SERIES | 叉⻋系列参考
Toyota forklift ranges. Select a model for the job.
Toyota 主力系列，
再按工况选型号。
Explore popular Toyota and Noblelift ranges and published specifications. Share your preferred brand, model, capacity and power type and we’ll source a match.
以下列出 Toyota 与 Noblelift 常⻅系列及公开性能资料。告诉我们所需品牌、型号、吨位和动⼒类型，我们会为您寻找匹配设备。
TOYOTA
销售与出租 · 电池电动
Sales & rental · battery electric
8FBE 电动系列
8FBE Battery-Electric Series
系列型号 / SERIES & MODELS
8FBE10 · 8FBE13 · 8FBE15 · 8FBE18 · 8FBE20
⽬录额定载荷 / CATALOGUE RATEDLOAD
1.0‒2.0 t
外转弯半径（按型号）
Outside turning radius
1.39‒1.68 m
电池电压 · 容量（5⼩时率）
Battery voltage · capacity
48 V · 280‒645 Ah
Toyota’s catalogue lists 1.0‒2.0 t rated-load variants. Share your capacity and application; we’ll find a matching unit.
Toyota ⼚⽅⽬录列出 1.0‒2.0 吨额定载荷型号。告诉我们所需载荷与⼯况，我们会为您匹配适⽤现货。
TOYOTA
销售与出租 · 电池电动
Sales & rental · battery electric
8FB 柴油系列
8FB Diesel Series
系列型号 / SERIES & MODELS
8FD15 · 8FD25 · 8FD30 · 8FD35N · 8FD50N
1.0‒8.0 t series range
⽬录额定载荷 / CATALOGUE RATEDLOAD
额定载荷中⼼（按型号)
Load centre by model
500 mm · 13.5 t / 600 mm · 3.5‒8 t
外转弯半径（⽰例）
Turning radius examples
8FD35N: 2.61 m · 8FD50N: 2.81 m
外转弯半径（⽰例）
Turning radius examples
8FD35N: 2.61 m · 8FD50N: 2.81 m
The manufacturer catalogue covers a 1.0‒8.0 t range. Share your target capacity and configuration; we’ll source a suitable unit.
⼚⽅⽬录涵盖 1.0‒8.0 吨系列，上列为型号参考。告诉我们所需吨位与配置，我们会为您寻找匹配现货。
NOBLELIFT
公司提供销售 · N1 三轮电动
For sale · N1 3-wheel electric
N1 三轮电动系列
N1 Three-Wheel Electric Series
系列型号 / SERIES & MODELS
FE3D16N1 · FE3D18N1 · FE3D20N1
⽬录额定载荷 / CATALOGUE RATEDLOAD
1.6 · 1.8 · 2.0 t
⾏驶速度（满载/空载）
Travel speed (laden/unladen)
15 / 15 km/h
最⼤爬坡能⼒（满载/空载）
Max gradient (laden/unladen)
15% / 20%
转弯半径
Turning radius
1.62 m
Noblelift lists 1.6, 1.8 and 2.0 t rated-load variants. Tell us your preferred model and capacity; we’ll source a matching unit.
Noblelift 官⽅⻚⾯列有 1.6、1.8、2.0 吨额定载荷版本。告诉我们所需型号与吨位，我们会为您匹配现货。
NOBLELIFT
公司提供销售 · Q 锂电系列
For sale · Q lithium series
Q 系列锂电叉⻋
Q Series Lithium Forklift
系列型号 / SERIES & MODELS
FE4P25Q · FE4P28Q
⽬录额定载荷 / CATALOGUE RATEDLOAD
2.5 · 2.8 t
⾏驶速度（满载/空载）
Travel speed (laden/unladen)
14 / 15 km/h
起升速度（满载/空载）
Lift speed (laden/unladen)
0.26 / 0.34 m/s铅酸/锂电；0.30 / 0.40 m/s QY
转弯半径（按版本）
Turning radius by version
2.23‒2.35 m
Noblelift lists 2.5 and 2.8 t variants. Share your capacity and battery/drive preference; we’ll find a suitable unit.
Noblelift 官⽅资料列出 2.5 与 2.8 吨版本。提供所需吨位、电池与驱动偏好，我们会为您匹配合适现货。
NOBLELIFT
⾼载荷电动系列
High-capacity electric series
⾼载荷电动叉⻋
High-Capacity Electric Forklift
系列型号 / SERIES & MODELS
FE4P50NP · FEP100N2
发布资料所列载荷级别 / Capacity classes in launch release
5 t electric · 10 t lithium
Noblelift’s 2025 launch release names the 5-ton FE4P50NP electric and 10-ton FEP100N2 lithium models. Detailed load conditions, speeds and configuration data are not listed in that announcement; verify against the formal specification and machine data plate.
Noblelift 2025 年发布资料列有 FE4P50NP 五吨级电动与 FEP100N2 ⼗吨级锂电型号；详细载荷条件、速度和配置参数未在该发布⽂中列明，需按正式规格及实机铭牌确认。
BACKHOE LOADER SERIES | 反铲装载机系列参考
Backhoe loaders selected for the digging conditions.
反铲装载机，
按挖掘工况选型。
The catalogue includes historical CASE 580SK, 580L Series 2 and 580M references, plus JCB 3CX/4CX and Cat 420/430. Published specifications are kept model- and configuration-specific. Share your digging depth and site conditions and we’ll source a suitable unit.
⽬录涵盖 CASE 580SK、580L Series 2、580M 历史机型，以及 JCB 3CX / 4CX 与 Cat 420 / 430。公开规格按具体型号和配置区分。告诉我们⽬标挖掘深度与作业条件，我们会为您匹配设备。
J C B
反铲装载机系列参考
Backhoe Loader family
3CX / 4CX 系列
3CX / 4CX Backhoe Loader family
系列型号 / SERIES & MODELS
3CX · 3CX PLUS · 3CX PRO · 4CX PRO
⼚⽅公布最⼤挖掘深度/
Published max dig depth
系列最⼤发动机功率
Maximum engine power in family
Up to 109 hp
装载机提升能⼒（系列资料）
Loader lift capacity (family page)
Up to 10,000 lb
JCB’s official family page lists several 3CX and 4CX configurations and states a maximum dig depth of up to about 20 ft; actual specs vary by model, configuration and market.
JCB 官⽅系列⻚列出多种 3CX 与 4CX 配置，并注明最⾼挖掘深度可达约 20 ft；实际参数按型号、配置与市场⽽异。
最⾼约 20 ft / 6.1 m
J C B
紧凑型反铲装载机
Compact Backhoe Loader
3CX Compact
3CX Compact Backhoe Loader
系列型号 / SERIES & MODELS
3CX Compact
⼯作重量 · 发动机功率 / Operating weight · engine power
6.13 t · 74 hp
转向⽅式
Steering
Four-wheel steering
低转速动⼒参考
Power/torque at low rpm
1,300‒1,400 rpm
⼚⽅保养间隔
Manufacturer service interval
500 hours
JCB lists an operating weight of about 6,130 kg and 74 hp for this compact model, intended for tighter worksites; specifications vary by configuration and market.
JCB 官⽅⻚⾯公布⼯作重量约 6,130 kg、发动机功率 74 hp，⾯向较狭窄作业空间；规格随配置及市场⽽异。
C A T
Caterpillar 反铲装载机
Caterpillar Backhoe Loader
420
Cat 420 Backhoe Loader
系列型号 / SERIES & MODELS
Cat 420
标准挖掘深度 / Standard dig depth
4.278 m
最⼤总功率（标准/选配）
Max gross power (standard/optional)
102 / 112 hp
最⼤⼯作重量（指定配置）
Max operating weight (specified setup)
11,000 kg
净扭矩提升率
Net torque rise
48%
Cat lists 4,278 mm standard dig depth and up to 11,000 kg operating weight; maximum gross power is about 102‒112 hp depending on configuration.
Cat 官⽅规格⻚列出标准挖掘深度 4,278 mm、最⼤⼯作重量 11,000 kg；最⼤总功率因配置约为 102‒112 hp。
C A T
Caterpillar 反铲装载机
Caterpillar Backhoe Loader
430
Cat 430 Backhoe Loader
系列型号 / SERIES & MODELS
Cat 430
标准挖掘深度 / Standard dig depth
4.612 m
最⼤总功率（SAE）
Max gross power (SAE)
118 hp (88 kW)
液压泵流量 @ 2,200 rpm
Hydraulic pump capacity
187 L/min
最⼤⼯作重量（指定配置）Max operating weight (specified setup)
11,000 kg
Cat lists 4,612 mm standard dig depth, up to 11,000 kg operating weight and 118 hp maximum gross power; market configurations may differ.
Cat 官⽅规格⻚列出标准挖掘深度 4,612 mm、最⼤⼯作重量 11,000 kg，最⼤总功率 118 hp；实际配置因市场⽽异。
C A S E
历史机型参考 · Super-K
Historical model reference · Super-K
580SK Turbo
580SK Super-K Loader Backhoe
系列型号 / SERIES & MODELS
580SK Turbo · 41-390 四缸涡轮柴油机
最⼤挖掘深度 · 伸缩⽃杆配置 / Max dig depth · Extendahoe extended
5.57 m · Extendahoe伸出
发动机总功率
Engine gross power
85 hp (63 kW)
SAE 净功率
SAE net power
78 hp (58 kW)
标准反铲最⼤挖掘深度
Standard backhoe max dig depth
4.39 m
Historical CASE 580SK Turbo specification reference. The 5.57 m figure applies with the Extendahoe extended; standard configuration differs. Confirm the unit data plate and attachment setup.
CASE 历史规格表中的 580SK Turbo 参考值。5.57 m 为 Extendahoe 伸出配置；标准配置挖掘深度不同，具体以实机铭牌和属具为准。
C A S E
历史机型参考 · Series 2
Historical model reference · Series 2
580L Series 2
580L Series 2 Loader/Backhoe
系列型号 / SERIES & MODELS
580L Series 2 · 580L Series II
最⼤挖掘深度（标准/Extendahoe） / Max dig depth (standard/Extendahoe)
4.34 – 5.56 m
发动机功率 @ 2,200 rpm
Engine power
75 hp gross · 73 hp net
铲⽃油缸挖掘⼒
Bucket-cylinder digging force
49.9 kN
最⼤扭矩 @ 1,200 rpm
Maximum torque
273 / 270 N·m gross/net
CASE 580L Series 2 historical sheet lists 4.34 m with the standard backhoe, 4.52 m with Extendahoe retracted and 5.56 m extended. This is not the separate 580 Super L designation; the photo shows a 580L-family machine and its exact subseries is unverified.
按 CASE 580L Series 2 历史规格表列⽰：标准反铲 4.34 m，Extendahoe 收回 4.52 m、伸出5.56 m。本型号不与 580 Super L 混为⼀谈；图⽚为 580L 家族机型，具体⼦系列未核实。
C A S E
历史机型参考 · M Series 2
Historical model reference · M Series 2
580M
580M Loader Backhoe
系列型号 / SERIES & MODELS
580M · 不含 580M Turbo / Super M 变型
反铲挖掘深度（规格表） / Backhoe digging depth (brochure)
4.34 m
发动机净功率
Engine net power
76 hp (57 kW)
反铲铲⽃挖掘⼒
Backhoe bucket force
49.9 kN
装载机提升⼒
Loader lift
2,804 kg
Based on the separately listed 580M in CASE’s historical 2004 M Series 2 brochure. Specifications for 580M Turbo, 580 Super M or later variants are not transferred to this model.
按 CASE 2004 年 M Series 2 历史资料中单列的580M 记录；不将 580M Turbo、580 Super M或后续变型的参数套⽤到本型号。
WHEEL LOADER / SHOVEL SERIES | 轮式装载机系列参考
Match the bucket capacity to he material.
Shovel,
从⽃容匹配现场。
This Shovel reference section uses wheel loaders to show different Cat 950 GC, 966 GC and 980 GC bucketcapacity ranges. Share the material, target bucket size and application so we can source a match.
这⾥的 Shovel 以轮式装载机为例，展⽰ Cat 950 GC、966 GC 与 980 GC 不同⽃容级别。提供物料、⽬标⽃容与⼯况，我们会按需求寻找匹配设备。
C A T
轮式装载机 / Shovel 参考
Wheel Loader / Shovel reference
950 GC
Cat 950 GC Wheel Loader
系列型号 / SERIES & MODELS
Cat 950 GC
铲⽃容量范围 /
Bucket capacity range
2.9‒4.4 m³
净功率
Net power 225 hp
(168 kW)
⼯作重量（参考配置）
Operating weight (reference setup)
18,849 kg
铲⽃掘起⼒
Bucket breakout force
154 kN
Cat lists 2.9‒4.4 m³ bucket capacity, about 18,849 kg operating weight and 225 hp net power.
Cat 官⽅资料列出铲⽃容量 2.9‒4.4 m³、⼯作重量约 18,849 kg、净功率 225 hp。
C A T
轮式装载机 / Shovel 参考
Wheel Loader / Shovel reference
966 GC
Cat 966 GC Wheel Loader
系列型号 / SERIES & MODELS
Cat 966 GC
铲⽃容量范围 /
Bucket capacity range
3.2‒7.1 m³
发动机功率
Engine power
321 hp (239 kW)
⼯作重量（参考配置）
Operating weight (reference setup)
21,781 kg
铲⽃掘起⼒
Bucket breakout force
164 kN
Cat lists 3.2‒7.1 m³ bucket capacity, about 21,781 kg operating weight and 321 hp engine power.
Cat 官⽅资料列出铲⽃容量 3.2‒7.1 m³、⼯作重量约 21,781 kg、发动机功率 321 hp。
C A T
⼤型轮式装载机 / Shovel 参考
Large Wheel Loader / Shovel reference
980 GC
Cat 980 GC Wheel Loader
系列型号 / SERIES & MODELS
Cat 980 GC
铲⽃容量范围 /
Bucket capacity range
4.3‒5.8 m³
净功率
Net power
393 hp (293 kW)
⼯作重量（参考配置）
Operating weight (reference setup)
29,760 kg
铲⽃掘起⼒
Bucket breakout force
212 kN
Cat lists 4.3‒5.8 m³ bucket capacity, about 29,760 kg operating weight and 393 hp net power.
Cat 官⽅资料列出铲⽃容量 4.3‒5.8 m³、⼯作重量约 29,760 kg、净功率 393 hp。
SCISSOR LIFT SERIES | 剪叉式升降平台参考
Choose by working height and platform capacity.
剪叉平台，
按⾼度与载荷选型。
Explore JLG scissor lifts using published manufacturer specifications to compare working height, platform capacity and machine weight. Share the site and job requirements and we’ll source a matching unit.
以下列出 JLG 剪叉式升降平台的⼚⽅公开参数，便于按作业⾼度、平台载荷与设备重量说明需求。告诉我们场地和⼯作要求，我们为您寻找匹配机型。
J L G
电动剪叉式升降平台
Electric Scissor Lift
ES1932 电动剪叉平台
ES1932 Electric Scissor Lift
系列型号 / SERIES & MODELS
ES1932
平台⾼度 · 平台额定载荷 /Platform height · platform capacity
5.8 m · 230 kg
平台延伸⻓度
Platform extension
0.91 m
延伸平台额定载荷
Extension deck capacity
120 kg
升起状态⾏驶速度
Drive speed when raised
0.8 km/h
最⼤爬坡能⼒
Gradeability
25%
JLG lists a 5.8 m platform height, 230 kg platform capacity and 1,565 kg operating weight. Final configuration and local standards depend on the selected unit.
JLG 官⽅资料列出平台⾼度 5.8 m、平台额定载荷 230 kg、⼯作重量 1,565 kg。最终配置与当地标准以实际机型为准。
J L G
电动剪叉式升降平台
Electric Scissor Lift
ES2646 电动剪叉平台
ES2646 Electric Scissor Lift
系列型号 / SERIES & MODELS
ES2646
平台⾼度 · 平台额定载荷 /Platform height · platform capacity
7.92 m · 545 kg
平台延伸⻓度
Platform extension
0.91 m
延伸平台额定载荷
Extension deck capacity
120 kg
升起状态⾏驶速度
Drive speed when raised
0.8 km/h
最⼤爬坡能⼒
Gradeability
25%
JLG lists a 7.92 m platform height, 545 kg platform capacity and 2,401 kg operating weight. Final configuration and local standards depend on the selected unit.
JLG 官⽅资料列出平台⾼度 7.92 m、平台额定载荷 545 kg、⼯作重量 2,401 kg。最终配置与当地标准以实际机型为准。
BOOM LIFT SERIES | 臂式升降平台参考
Consider working height and outreach together.
Boom Lift，
把⼯作⾼度与延伸⼀并考虑。
JLG 450AJ and 600AJ articulating booms offer different working heights and outreach. Share the target height, up-and-over access, ground conditions and load; we’ll find a suitable match.
JLG 450AJ 与 600AJ 曲臂平台提供不同的⼯作⾼度和⽔平延伸参考。告诉我们⽬标⾼度、越障需求、地⾯条件与载荷，我们为您寻找合适设备。
J L G
发动机驱动曲臂式臂架平台
Engine-powered articulating boom
450AJ 曲臂式臂架平台
450AJ Articulating Boom Lift
系列型号 / SERIES & MODELS
450AJ
平台⾼度 · 平台额定载荷 /Platform height · platform capacity
13.72 m · 7.62 m
轴摆 / 收⻋⻓度
Axle oscillation / stowed length
0.10 m · 6.57 m
爬坡能⼒（2WD / 4WD）
Gradeability (2WD / 4WD)
30% / 45%
转台回转⻆度
Platform swing
355° · ⾮连续
最⼤越障⾼度
Up-and-over height
7.3 m
JLG lists 7.3 m up-and-over height, 250 kg platform capacity and 6,418 kg operating weight. Actual specifications vary by configuration and market standards.
JLG 官⽅资料列出越障⾼度 7.3 m、平台额定载荷 250 kg、⼯作重量 6,418 kg。实际参数随配置及市场标准⽽异。
J L G
发动机驱动曲臂式臂架平台
Engine-powered articulating boom
600AJ 曲臂式臂架平台
600AJ Articulating Boom Lift
系列型号 / SERIES & MODELS
600AJ
平台⾼度 · 平台额定载荷 /Platform height · platform capacity
18.47 m · 12.10 m
轴摆 / 收⻋⻓度
Axle oscillation / stowed length
0.20 m · 8.83 m
爬坡能⼒（2WD / 4WD）
Gradeability (2WD / 4WD)
30% / 45%
转台回转⻆度
Platform swing
360° 连续
最⼤越障⾼度
Up-and-over height
8.1 m
JLG lists 8.1 m up-and-over height, 227 kg platform capacity and 10,292 kg operating weight. Actual specifications vary by configuration and market standards.
JLG 官⽅资料列出越障⾼度 8.1 m、平台额定载荷 227 kg、⼯作重量 10,292 kg。实际参数随配置及市场标准⽽异。
For Backhoe, Shovel, Scissor Lift and Boom Lift, share your preferred brand, working height, digging depth, load or tonnage; we’ll source equipment to match the job.
Backhoe、Shovel、Scissor Lift 与 Boom Lift：告诉我们所需品牌、⼯作⾼度、挖掘深度、载荷或吨位，我们会按⼯况寻找匹配设备。